Loading... Please wait...

TM8.7 Tide Clock Movement (no hand) For dial/case up to 1/4" thick

$7.95

Product Description

Make or repair your own TIDE CLOCK with this movement from Coastal Tide Clocks. 

Specifications:

  • Tide movement dimensions:  2 1/8"w x 2 1/8"h x 5/8"deep
  • This tide movement has a 5/16" diameter threaded diameter shaft
  • Threaded shaft length is 8.7mm or 0.35 inch 
  • Total shaft length is 12mm. NOTE: Total shaft length with pin cap installed will add approximately 1/16" to 1/8" in overall shaft length.
  • Maximum dial/case thickness 1/8"
  • Requires one new AA alkaline battery (not included)
  • Our tide clocks require one hand (NOT INCLUDED) See tide hands to order hand if needed.
  • Instructions included

NOTE:  If making a new TIDE clock, measure the thickness of your dial to make sure you have enough shaft length to go through the case.
If replacing an existing TIDE clock motor, remove non-working motor and compare your dimensions to our specs to select the correct movement.

Our tide clock motors work best for the Atlantic Ocean and its surrounding waterways due to their semidiurnal tides (2 high and 2 low tides per day).

Click on bulk pricing link below "add to cart" button to see discounts.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity: